Introduction, Features, Product overview – Chauvet LG-3355 User Manual

Page 5: General instructions, Eatures, Roduct, Verview, Eneral, Nstructions, Ntroduction

Advertising
background image

I

NTRODUCTION

Your LG-3355 is very unique! You may notice that the beams coming out of the projector are larger

than the 4.95mW projectors. There is a very distinct reason for this. Unlike 4.95mW projectors the

output of the CHAUVET laser projectors with Fatbeam™ technology inside outputs <20mW for each

beam. Normally outputs greater than 4.95mW require a variance from the FDA. This product has

been designed to meet a special classification of ClassIIIa. Under this classification with the Fat

Beam technology the acceptable energy levels (AEL) have been met. Therefore the maximum

potential exposure to the unaided eye is less than 4.95mW for a static beam. Additionally the (MPE)

or Maximum Permissible Exposure with this product is below acceptable levels for hum ocular or

tissue exposure.

Features

10mW Fatbeam™ Laser technology produces 10-14mm beam which complies with IEC Safety
Standards under ClassIIIa

276 preset patterns, 9 of the most popular patterns triggered by the remote

Operating modes; Auto, Sound Active & Master/Slave
- Linking cable included

Wireless remote included for Manual mode operation

Scanning motors (micro stepping)

Sound sensitivity control

• Rugged

construction

European design plastic case

Product Overview

DANGER: Laser Radiation emitted from this aperture.

Before connecting the unit to AC power, make certain that
the front aperture is pointed away from you or others.

AC Power Connection:

The unit is supplied with a power plug appropriate to its voltage
and destination. Should any other connections be required they
must be carried out with the following configuration.

Earth = Green/Yellow cable
Neutral = Blue cable
Live = Brown cable

Infrared sensor (front).
User can now select from 2
Infrared sensor locations (front)
or the (rear).

General Instructions

This fixture is designed to operate as a stand-alone unit or master/slave link. Linking the units in

master/slave connection, the first unit will control the other units to give an automatic sound activated

synchronized light show. This function is good when you want an instant show. Plug in the unit and

turn the ON/OFF switch to ON position, the unit will work. It will turn off the laser diode automatically

when the music stops after 7 seconds or no signal input.

LG-3355 User Manual

5

11/14/2007/18:12

Advertising