Hyundai H-CDM8019 - Manual (Page 14)

15
Radio operations
Choose Radio Band
Press BND button to activate the Radio mode (even when CD is playing). The unit is equipped with 3 FM bands
(FM1, FM2 and FM3) and 2 MW bands (MW1 and MW2). Each of the bands can store up to 6 preset stations,
making total 30 preset memory stations.
Radio Tune/Seek Function
In Radio mode, press PREV/NEXT button to manually adjust the radio frequency.
Auto seek modes
Press and hold VOL knob until “DSP OFF” is shown on the display, then press VOL knob to cycle through the
menu selections until “SEEK 1” is shown. Rotate VOL knob to select either “SEEK 1” or “SEEK 2”.
1. Seek 1: press and hold PREV/NEXT button for more than 1 second. The unit will seek the next strong and clear
frequency station. Repeat to seek more stations in your listening area with a strong signal.
2. Seek 2: press and hold PREV/NEXT button for station search. The search will not cease until you release the
button.
Mono/Stereo Reception Control
In FM radio mode, press MON button to toggle between mono or stereo reception. The display will show
“MONO” or “STEREO”. Improvement of distant station reception can be done by selecting mono operation,
which may cut down some reception noise.
Save Your Preset Stations
There are six numbered preset buttons, which can store and recall stations for each band. While listening to a radio
station you would like to save as a preset, press and hold one of the buttons numbered 1-6 until you hear a beep.
The button you pressed is now the preset button for that station.
Automatic Store/Preset Scan
1. Automatic scan and store: while listening to the FM Radio, press and hold F/PS button for more than 3
seconds. The receiver will automatically scan the saved stations of that FM band. While listening to the AM radio,