Casio QV-5500SX - Manual (Page 17)

65
PLAYBACK
PLAYBACK
The following describes the different techniques that you can
use to playback recorded images.
Basic Playback Operation
The built-in monitor screen of the camera lets you play back
recorded images without connecting an external monitor.
1. Slide the Function Switch
to PLAY.
2. Use [+] and [–] to scroll through the images
stored in camera memory.
• Press [+] to scroll forward and [–] to scroll back. Hold-
ing down either button scrolls at high speed.
NOTES
• Sliding the Function Switch to PLAY immediately after
recording an image displays the image you just re-
corded first.
• Pressing the shutter button while a movie or pan-
orama image is on the monitor screen starts playback
of the movie or panorama .
• The image that initially appears on the monitor screen
in the PLAY mode is a preview image. The full of im-
age appears after a few seconds.
REC
PLAY
66
PLAYBACK
Playing Back a Movie
Use the following operation to play back a movie that was
recorded using the operation under “Movie Recording” on
page 51.
1. Slide the Function Switch to PLAY.
2. Use [+] and [–] to select the movie you want to
play back.
3. Press the shutter button to start playing back
the movie.
• You can use [+] (forward) and [–] (reverse) while play-
ing back a movie to change the playback direction.
• To enlarge the movie image so it fills the entire moni-
tor screen, press DISP. Pressing the DISP again re-
turns the image to its original small size.
• Pressing the shutter button during movie play pauses
playback. Press the shutter button again to resume
playback.
• While movie playback is paused, you can use [+] (for-
ward) and [–] (reverse) to move frame-by-frame
through the movie.
4. After the movie is complete, press MENU.
67
PLAYBACK
5. Use [+] and [–] to scroll through the other im-
ages that make up the movie until the one you
want to use as the final image is on the display.
6. Press the shutter button to re-group the movie
images.
• The movie playback screen (page 66) appears after
the re-grouping operation is complete.
Regrouping Movie Images
When you record a movie, the camera automatically groups
images that make up the movie. Transferring a movie to a
personal computer causes its images to become ungrouped.
If you download the movie back to the camera, you will be
unable to play it back as a movie unless you use the follow-
ing procedure to re-group the images.
• Only images recorded while “JPEG” is selected for the
Record Menu (page 60) “File Format (Movie)” item can be
grouped.
• Only images recorded using Economy Mode resolution
can be grouped.
• Non-movie from a computer or other source are grouped at
a size of 160 x 120 pixels.
To re-group movie images
1. Slide the Function Switch to PLAY.
2. Use [+] and [–] to display the first of the four
images that make up the movie you want to re-
group.
3. Press MENU.
4. Select “Tools” “Group” “Movie”.
To ungroup movie images
IMPORTANT!
AVI format movie files stored in the AVI folder cannot be
ungrouped.
1. Perform steps 1 through 3 under “To re-group
movie images”.
2. Select “Tools” “Group”.
3. Press the shutter button.
68
PLAYBACK
Panorama Playback
Use the following operation to playback panoramas re-
corded using the operation under “Panorama Recording” on
page 53.
1. Slide the Function Switch to PLAY.
2. Use [+] and [–] to select the panorama you
want to play back.
3. Press the shutter button to start panorama
playback.
• You can change the direction of a panorama that is
playing back by pressing [+] or [–].
• To enlarge the panorama image so it fills the entire
monitor screen, press DISP. Pressing the DISP again
returns the image to its original small size.
• Pressing the shutter button during panorama play
pauses playback. Press the shutter button again to re-
sume playback.
• While panorama playback is paused, you can use [+]
(forward) and [–] (reverse) to move frame-by-frame
through the panorama.
4. Press MENU to stop panorama playback.