Chief Manufacturing Centris VESA 100mm User Manual
Page 2
2
Installation Instructions
FHP
IMPORTANT WARNINGS AND PRECAUTIONS!
WARNING:
A WARNING alerts you to the possibility of serious injury or death if you do not follow the instructions.
CAUTION:
A CAUTION alerts you to the possibility of damage or destruction of equipment if you do not follow the corre-
sponding instructions.
•
WARNING: Improper installation can result in serious personal injury! Make sure that the structural members can
support a redundant weight factor five times the total weight of the equipment: if not, reinforce the struc-
ture before installing the FHP.
•
WARNING: Be aware also of the potential for personal injury or damage to the unit if it is not adequately mounted.
•
WARNING: The installer is responsible for verifying that the ceiling to which the FHP is anchored will safely support
the combined load of all attached components or other equipment.
•
WARNING: The weight of the display placed on the FHP must not exceed 40 lbs. (18.1 kg), the maximum load capacity
of the FHP.
•
WARNING: Watch for pinch points. Do not put your fingers between movable parts.
•
WARNING: Make sure the mount and brackets are correctly oriented.
•
CAUTION: Check the unit for shipping damage before you begin the installation.
TOOLS REQUIRED FOR INSTALLATION
•
Saw (to cut plastic)
•
Electric drill and bit set
•
Phillips Screwdriver
•
Level
NOTE: Other tools may be required depending on the
mounting surface and method of installation.
CONTENTS
DRAWINGS ................................................................
2
INSPECT THE UNIT BEFORE INSTALLING .............
3
FHP INSTALLATION ..................................................
3
DISPLAY INSTALLATION ..........................................
4
CABLE MANAGEMENT .............................................
5
ADJUSTMENTS .........................................................
5