Campbell Hausfeld PL150296 - Manual (Page 7)

Visit us online:
www.chpower.com
24
Cutting Tools
1F7 C36=4U\YfUbi0) @C9
1F7 C36=BUaeYbU]U^d0) @C9
1F7 C36=4U\YfUbi0) @C9
1F7 C36=BUaeYbU]U^d0) @C9
1F7 C36=4U\YfUbi0) @C9
1F7 C36=BUaeYbU]U^d0) @C9
1F7 C36=4U\YfUbi0) @C9
1F7 C36=BUaeYbU]U^d0) @C9
1F7 C36=4U\YfUbi0) @C9
1F7 C36=BUaeYbU]U^d0) @C9 Ai
r
To
ol
s
• At 2,500 strokes per minute, makes clean cuts
into 18 gauge cold rolled steel
• Designed to cut angles and squares in sheet
metal, aluminum, rubber and plastic
• Great for duct work and autobody repair
Metal Shear PL1543
• 5 mm punch diameter, 1/2” flange depth
• Prepares sheet metal for riveting, brazing or welding
Punch/Flange Tool PL1550
• 1 5/8 ” (41 mm) stroke provides the power for general
cutting, chipping and scraping
• Cuts, chips and scrapes most materials and is used for
light duty automotive exhaust removal, front-end work
and masonry
• Patented balanced, lightweight, ergonomic design provides
increased comfort and reduces fatigue
• Includes 2 chisel bits
1 5/8 ” Stroke Hammer TL1103
0.1
6.0
6.7
• At 10,000 strokes per minute, provides the
cutting power to cut up to 16 gauge steel
• Designed to cut plastic, aluminum, fiberglass and
sheet metal on flat and curved surfaces
• Equipped with safety latch to prevent accidental starts
Reciprocating Saw PL1540
1.5
• At 3,800 strokes per minute, provides the cut-
ting power to cut up to 16 gauge steel
• Designed to cut intricate patterns in sheet metal
and aluminum without leaving burrs
Air Nibbler PL1519
7.8