Casio EX-Z18 - Manual (Page 85)

85
SHOOTING A SNAPSHOT
■
Using Edit Family to Assign a Priority Level
to Recorded Face Data
After recording face data, you can assign a name and a priority
level that controls how the data is applied when shooting a
snapshot.
1. In the REC mode, press [SET].
2. Use [
S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
3. Use [
W] and [X] to
select “ Edit
Family” and then press
[SET].
This display the face data
editing screen.
4. Use [
S], [T], [W], and [X] to select the face
data you want to edit, and then press [SET].
5. Use [ W] and [X] to select a name, and then
press [
T].
• You can select any one of 12 preset names to face data.
6. Use [ W] and [X] to select the priority level you
want and then press [SET].
• You can select any one of four levels, from “
”
(Lowest) to “ ” (Highest). Selecting “ ”
(Disabled) will disable face recognition.
Deleting recorded face data
Perform the following steps when you want to delete recorded
face data.
1. In the REC mode, press [SET].
2. Use [
S] and [T] to select the third option from
the top in the operation panel (Face
Recognition).
3. Use [
W] and [X] to select “
Edit Family”
and then press [SET].
4. Press [MENU].