Bolens 24596-9 - Manual (Page 5)

HANDLE THROUGH
SLOT IN FRAME
SHOULDER
BOLT (A)
BELLEVILLE
WASHER (B)
FIGURES.
HEX NUT (D)
t
2 .
3.
4.
Place lower handle into the slots in the rear
frame. See figure 3.
Line up holes in handle with holes in frame.
See figure 3.
Secure rear wheels (W) and lower handle (T) to
frame with shoulder bolts (A), belleville washers
(B) (cupped side of washer against the frame),
lock washers (C) and hex nuts (D). See figure 3.
LOCK
WASHER (C)
FRONT
WHEEL
5.
BELLEVILLE
WASHER (B)
LOCK WASHER (C)
HEX NUT,
(D)
Assemble the front wheel (V) toward the inside
of the unit as shown in figure 4. Place shoulder
bolt (A) through wheel, then belleville washer (B)
(between wheel and frame, cupped side against
the frame). Secure with lock washer (C) and hex
nut (D). See figure 4.
FIGURE 4.
Assemble the upper handle (R) to lower handle.
Place the head of carriage bolts (E)to the outside
of handle. Secure with lock washers (F) and
and hex nuts (G). See figure 5.