Char-Broil CB600X 10201597-50 - Manual (Page 15)

5
6
10201597-50 • 15
• Install legs by placing 2 - 1/4-20x1/2” Hex Head Bolt through the smoker body and through each leg as shown. Thread the
bolts into the 1/4-20 nut welded to the underside of each leg. Tighten bolts by hand. Using an adjustable wrench (not
provided), tighten each bolt securely.
• Install the leg with the rating label on the back side of the smoker body, as shown.
Install bolts from inside
the smoker body
Qty: 8
#1/4-20x1/2"
Hex Head Bolt
• With the assistance of a helper - stand the unit upright on its legs.
CAUTION: THIS UNIT IS HEAVY!
Stand the unit upright on its legs
CAUTION: This unit is HEAVY!
Do not attempt this step
without assistance!
Leg with Rating Label
• Install legs by placing 2 - 1/4-20x1/2” Hex Head Bolt through the smoker body and through each leg as shown. Thread the
bolts into the 1/4-20 nut welded to the underside of each leg. Tighten bolts by hand. Using an adjustable wrench (not
provided), tighten each bolt securely.
• Install the leg with the rating label on the back side of the smoker body, as shown.
Install bolts from inside
the smoker body
Qty: 8
#1/4-20x1/2"
Hex Head Bolt
• With the assistance of a helper - stand the unit upright on its legs.
CAUTION: THIS UNIT IS HEAVY!
Stand the unit upright on its legs
CAUTION: This unit is HEAVY!
Do not attempt this step
without assistance!
Leg with Rating Label