Changing reversible door (ff8wr/ff8ssr) – Avanti FF8WR User Manual

Page 14

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

*■'V.

This refrigerator has been built with the door hinges on the right.

If you

wish

to change the opening direction, follow the instruction below.

- Unplug the refrigerator from its electrical outlet,
- Empty everything in the refrigerator, including shelves, foods, etc.

Changing Reversible Door

(FF8WR/FF8SSR)

1. Remove COVER on the right top of the cabinet.

2. Remove three bolts that hold HINGE to the cabinet.

3. Lift DOOR and place it on a padded surface to prevent

scratching it

1. Remove two botts from HINGE on tbe right middle

the cabinet and keep them for later use.

2. Remove HINGE.

3. Remove DOOR from the cabinet lifting up slightiy.

4. Lift DOOR and place it on a padded surface

prevent scratching it

1. Remove two BOLTS from HINGE.

2. Take off HINGE from the cabinet

3. Unscrew HINGE PIN arxi move to opposite side.

4. Fasten it on the left bottom of the cabinet with the three

bolts previously removed.

1. Remove screw from stopper at the bottom

DOOR.

2. Take it off and rotate, transfer to the other side ai

fasten with screw.

^4-

Advertising
This manual is related to the following products: