Operation – Black & Decker cat 3027-90 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATION
Figure 7 shows proper sawing
position. Note that hands are
kept away from cutting area,
safety glasses are worn, power
cord is kept clear of cutting
area and positioned so that it
will not be caught on the work
piece while cutting and that
clothing is not loose to the point
where it might get caught in
moving parts.
When operating the saw, keep
the cord away from the cutting
area and prevent it from becom
ing hung up on the work piece.
WARNING: It is impor
tant to support the work
properly and to hold the
saw firmly to prevent
loss of control which
could cause personal in
jury. Figure 7 illustrates
typical hand support of
the saw.
TO AVOID KICKBACK.
DO
SUPPORT BOARD OR
PANEL
NEAR
THE CUT.
FIGURE 8
8