Interchanging nozzles – Bolens TB720r User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
OPERATING INSTRUCTIONS
INTERCHANGING NOZZLES
Your unit is completely assembled and Installed with a
flare nozzle (Fig. 3). The concentrator nozzle is in the
box (Fig, 4). Use the following instructions to
Interchange the two nozzles.
A
A
WARNING:
To avoid serious personai
injury, do not insert hands into nozzles
when removing or instaliing them.
WARNING:
To reduce risk of injury,
disconnect
power
source
before
removing nozzies.
Indexing
Button on
Inside of
Nozzle
Flare Nozzle
Fig.3
Removing Flare or Concentrator Nozzle from
Blower Housing
1. Grasp the nozzie and turn it counterclockwise
approximately 45" until the indexing button on the
inside of the nozzle snaps out of the detent in the
blower housing (Fig. 5a for the flare nozzle and
Fig. 5b for the concentrator nozzle). Pull the nozzle
off of the blower housing.