Black & Decker WM2000 - Manual (Page 5)

VICE JAWS AND CEOTRE BOARD OPERATION
By loosening the two tommy bar handles
the centreboard can be removed
converting the WM2000 into a large
capacity vice. Each tcxnmy bar works
independently so that the front vice jaw
can be adjusted into a tapered position
when required (fig. 4). The rear vice jaw is
adjusted by a snap lock mechanism
(pressure upwards releases the jaw, and
downwards pressure locks the jaw) and
can be repositioned into a series of
parallel holes (fig. 4).
The centre board can be used between
the two bottom crossframe members
when greater capacity is required fig. 4 &
fig. 7.
rig. 4
VICE JAW AND WOPJtBENCH COMBINED
Slide the centre board base supports (B)
into the rear holes of the appropriate
parallel frame.
Mote; Wiiei; correctly positioned a slight
gap remains between the rear vice jaw
and the centre board (A) (fig. 5).