Handle assembly instructions – Bolens 118-620A User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
HANDLE ASSEMBLY INSTRUCTIONS
4. Fasten throttle control in posi
tion on right hand side of upper
handie with hex boit and iock-
nut provided.
6.
Secure throttle control wire to
upper handle with cable tie. Cut off
excess cable tie.
1. Place lower handle in handie mount
brackets.
5. Check ALL nuts and boits for correct
tightness.
Place upper handle in posi
tion so that the hole in
handle is iocated on the
right hand side and secure
with curved head bolts and
hand knobs provided.
NOTE
It may be necessary to spread the ends of the
lower handle outward slightly to assure a snug fit
against the bracket mounting area.
Advertising