AEG EL User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Setting the water temperature

Set the appliance to the desired water temperature by

turning the temperature selection dial:

The white range of the selection dial:

Warm to hot water from approx. 35 X to approx.

85 X

The red range of the selection dial:

Boiling water

(Continuous on model Thermofix E,

thermostatically controlled on models Thermofix

EL and GL - once the required temperature has
been, the fitted buzzer will operated).

Please note:

The temperature selection dial cannot be

overwound!

Switching the appliance ON

Press the pushbutton which is located in the centre of

the selection dial. The indicating lamp will now light up

and the appliance will start to heat the water.

Switching the appliance OFF

If the appliance has been set to a temperature within the

white range of the selection dial, it will switch itself off

automatically once the set temperature has been rea­
ched.

_ - _

The appliance can be switched off at any time simply by
turning the temperature selection dial anticlockwise.

Caution:

If the appliance has been set to continuous

boiling (Thermofix E), it is necessary to switch it off ma­
nually.

With

the

thermostatically

controlled

boiling

facility

(Thermofix EL, GL), the appliance will switch itself off

automatically when the boiling point has been reached
and will switch itself on again after the temperature has
droped. Here, too, the appliance must be switched off
manually.

To obtain warm or hot water

Turn the handle of the middle tap (marked red).

To obtain cold water

Turn the handle of the right-hand tap (marked blue)

Cold water can be obtained at any time, even whilst a fil­

ling of water is heating up. Cold and hot water can be mi-

.

xed by opening the red and blue taps simultaneously.

Important Note:

Installation and initial operation

Installation and initial operation of the water heater must be carried out by a suitably
qualified person who is responsible for ensuring that the work is done correctly and

who can explain to the user how the appliance must be operated.

The appliance must not be switched on when empty!

9

Advertising
This manual is related to the following products:

GL, E