530 a – Bolens 113-530 A User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
120-----
%
1 1 3 - 5 3 0 A
NOTE: Set screws in pulleys are treated with a
nut and bolt sealant. Remove with Allen 4-CYCLE ENGINE
wrench while applying heat with a small torch.
Change oil after first 5 hours of
operation while engine is warm.
Sealant disintegrates at 400*^.
86
Thereafter, change oil every 25 hours
of operation while engine is warm.
Engine may be drained through oil
filler opening. Be sure to replace drain
plug and oil filler cap.
For Upper Handle:
Chrome - 9354
White - 749-111
NOTE: To engage the
blade with the engine
running:
1.
Move the throttle
control
lever
to
"FAST" position.
2.
Engage the blade
engagement lever
SLOWLY.
3.
A d j u s t e n g i n e
speed.