9 new message alert, New message alert, Acknowledging messages – Bell Sports BAM-300D User Manual
Page 25: Reading text messages, Reading previous messages
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

9 New Message Alert
The phone will alert you to new messages in four w'ays;
• Displaying a message on the screen
• Five short beeps(if enabled)
• Flashing the red light on the earpiece
• Displaying the on the LCD screen. If the message
is marked urgent, the icon will flash and there will be
asterisks on either side of the message.
^Acknowledging Messages
1. Press any key.
* The phone will return to its normal display. The red
light will continue to flash and a beep will occur
periodically until the new message is retrieved.
9 Viewing Pages and Messages
Reading Text Messages
1. Press .
2. Press
to view TEXT
messages to view the messages in
the order they were received
unless they were marked urgent.
Urgent messages are displayed
first. Messages will automatically
scroll page by page. To manually
scroll through the message line
by line, press
or (r^ .
At the end of the message, press
!%ill IE
I Neiu Text
[TeKt I Uoice]
I
PAGE from
818-4115
[erase 1 quit]
48
HI
3. Press (
ro
^ under erase to erase the message, press
(
r
^ again.
4. Press
(
snd
)
to place the call to the callback number.
5. Press
and (ir^ to quit.
i^NOTE
When there are no new messages, the phone wall
display a list of previously saved messages.
When viewing a callback number, you can save the
number in your phone book memorv' by pressing ■
However, the number is already saved in your phone
book if there is a name displayed on the line above the
callback number. If you do save the callback number,
then you will be returned to the callback number
screen.
Pressing (or prepending the number with an area
code) will place the call.
Reading Previous Messages
1. Press
2. Press
rc
Q under TEXT. This displays the list of
previous messages. Each line will show the first 11
characters of the messages.
3. Press (yH) or (▼
3
)to select a message.
4. Press
under ERASE. This erases the message
and goes to the next message or press
under
VIEW. This lets vou view the message.
49