Avanti ELITE DG200W - Manual (Page 17)

CARE & MAINTENANCE
REMOVING THE OVEN DOOR
Type A
To facilitate oven cleaning, it is possible to remove the door.
Please follow the instructions carefully:
— Open the door completely.
— Push down the lever “L" and, keeping it in this position, slowly close the door in order
to block the hinge (fig. 25a).
— Grip the door (as indicated in fig. 25b) and, while dosing it, release the two hinges
as shown in fig. 25c.
— Rest the door on a soft surface.
Figure 25a
DOOR ASSEMBLY
— Grip the door with your hands placed
near the hinges and raise the levers
“H" with your forefingers (fig. 25c)
— Insert the hinges in their position until
levers “H" are hooked.
— Open the door completely to obtain
the release of levers “L”.
Figure 25b
Figure 26a
REMOVING THE OVEN DOOR
Type B
The oven door can easily be removed as follows:
- Open the door to the full extent (fig. 26a).
- Attach the retaining rings to the hooks on the left and right hinges (fig. 26b).
~ Hold the door as shown in fig. 26.
- Gently close the door and withdraw the lower hinge pins from their location (fig. 26c).
— Withdraw the upper hinge pins from their location (fig. 26d).
— Rest the door on a soft surface.
— To replace the door, repeat the above steps in reverse order.
Figure 26c Figure 26d Figure 26
77