Engine, Preparation, Engine preparation – Bolens 247.29773 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Clevis Pin
FIGURE 13.
FIGURE 15.
5. Drag Stake Support Attachment.
Slide the drag stake support into the chassis and
secure with “U” clevis (A) and hair pin cotter (!).
See figure 14.
ENGINE
PREPARATION
in fresh
ddc of gasoline
FIGURE 14.
6. Drag Stake Attachment.
Slide the drag stake into the drag stake support
depth and secure with clevis pin (F) and hair pin
cotter (I). See figure 15.
FIGURE 16.
1. Before starting, fill crankcase with 1 V4 pints
of SAE 30 heavy duty detergent oil or to top of
filler neck. Be sure that the engine is level.
See figure 16.
2. Change oil after first 2 hours of operation and
every 25 hours thereafter. Check oil every 8
operating hours.
3. Fill fuel tank with clean fresh regular grade of
gasoline.