Channel Vision B-201 - Manual (Page 2)

2
Model B-201
Features:
h
h
h
Easy installation
Sends video over 1,000 ft. of twisted pair
Compatible with Category 5, 5e, and 6 wiring
Small size allows installation in crowded spaces h
The video balun provides the necessary impedance
transformation to transition from 75 ohm coax to twisted pair
cabling. It is a great way to deliver video from a security
camera when you only have a twisted pair ran to the camera
location and no coax. The low cost, simplicity, and availability
of twisted pair cable, makes the B-201 a convenient choice
for both new construction and retro-fit applications.
B-201
BNC connector
for standard
75-ohm video cable
Screw terminal
connections for
twisted pair
B-201
C
V
HANNEL
ISI
O
N
TM
3
B-201
C
V
HANNEL
ISI O N TM
B-201
C
V
HANNEL
ISI O N TM
B-201 C
V HANNEL
ISI O N TM
Video
Installation:
h
h
h
Connect video signal to the BNC connector of the B-201.
Attach a matched pair from your twisted pair cable to the
screw terminals on the B-201.
If there is no power available for the camera, cut the
connector off of the end of the power supply and use
another pair from your twisted pair cable to splice in an
extension.
Any standard camera
or composite video signal
Camera
power supply
To Monitor
or
Video distribution
Power
If necessary, use another
pair in the twisted pair
cable to make a power
supply extension.
Up to 1,000 ft.
of
CAT5 cable
Installation Diagram
Model B-201