Data output mode – A&D Digital Platform Scales FG-60KAM User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Data output mode
□ stream mode Function setting “F5-0"
The scale outputs the current display data. The data-update rate is approximately 10
times per second. This rate is the same as the display-update.
The scale does not output data while it is in setting mode.
□ Print switch mode
When the
Function setting “F5-2”
PRINT switch is pressed while the weighing data is stable (STABLE
indicator is on), the scale transmits the data.
□ Auto-print mode +/- data Function setting “F5-3“
The scale transmits the weighing data when the display is stable (STABLE indicator
is on) and the data is more than +4d or iess than -4d of weight data,
d = minimum weight display (see “12-1 Specifications”)
When in counting mode, “d" is equal to minimum weight display of kg mode.
The next output can be obtained after the display returns to between -4d and +4d.
□ Auto-print mode + data Function setting “F5-4“
The scale transmits the weighing data when the display is stable (STABLE indicator
is on) and the data is more than +4d of weight data.
d = minimum weight display (see “12-1 Specifications”)
When in counting mode, “d” is equal to minimum weight display of kg mode.
The next output can be obtained after the display returns to below +4d.
□ Command mode Function setting “F5-1
In the command mode, the scale is controlled by commands that come from the
personal computer and so on.
Command list
“Q” command Command to request the current weighing data.
Command
Reply
Q
C
r
L
f
S T
1
+ 001
“Z” command Same operation as the
Command
Z
C
r
L
f
□ This command works as
RE-ZERO
4 5 _ k g C
r
L
f
or
ZERO switch.
and as ZERO for U.S.A. modeis.
“T” command Same operation as the TARE switch
Command T
C
r
L
f
□ This command works as TARE for U.S.A. models.
□ The metric models cannot accept this command.
19