Apollo GX50 - Manual (Page 4)

Approach Setup Summary
A. Load Destination Airport
Load a destination airport. Load a stored
Fiight Pian, or edit the active Fiight Pian.
You may aiso use the DiRECT-TO button
to choose a destination. The destination
must be an airport that has an estabiished
approach capabiiity.
B. Load Approach information
1. Press FPL twice to reach the home page
Fiight Pian Mode and press SEL, or
press SEL whiie in the Nav function.
2. Press ENTER to prepare to ioad
approach waypoints.
3. Turn the SMALL knob to dispiay the
avaiiabie approach choices.
4. Press ENTER to seiect the dispiayed
approach path.
5. Turn the SMALL knob to dispiay the
approach iegs.
6. Press NAV to return to Navigation Mode.
Approach Checkiist
Location
Enroute
Within 30 nm of
Destination
iAF Active Waypoint
FAF Active Waypoint
At FAF (MAP Becomes Active)
At MAP (TO/FROM Transition)
MAFiP Active Waypoint
Action
Load Approach
Enabie Approach & enter aitimeter setting
(Approach annunciator turns ON)
(CDi goes to 1 nm fuii-scaie sensitivity)
Verify Approach annunciator is ON
Verify/Set OBS/FiLD: ON for Procedure Turn or Fioid
OFF to sequence
Verify green Approach-Active annunciator is ON
Verify aitimeter setting is entered
Verify/Set OBS/FiLD: OFF to sequence to MAP
Verify Approach-Active annunciator is ON
(CDi goes to 0.3 nm fuii-scaie sensitivity)
if NOT ianding: Press OBS/FiLD to cancei
Approach-Active
(Green Approach-Active annunciator turns OFF)
(Approach Annunciator remains ON)
(CDi goes to 1.0 nm fuii-scaie sensitivity)
Verify OBS/HLD is ON
Location
DME-Arc Checklist
Action
At Arc
intercept
1. Verify/Set OBS/HLD ON
2. USE DME-Arc Page in NAV mode
3. Verify or seiect DME-Arc Reference Waypoint and foiiow the
prompts
4. Use Nav or Map mode and foiiow information
On Arc 1. Use DME-Arc page in NAV mode or Map mode to navigate
2. Foiiow prompts for inbound ieg intercept
inbound Leg
intercept 1. Foiiow prompts to turn to next ieg