Setting the temperature control – Avanti 509XBL User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Electrical Connection
'-Warning'^
Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is
damaged, have it replaced by an authorized Avanti Products service center.
This refrigerator should be properly grounded for your safety. The power cord of this
refrigerator is equipped with a three-prong plug which mates with standard three prong wall
outlets to minimize the possibility of electrical shock.
Do not under any circumstances cut or remove the third ground prong from the power cord
supplied.
Use of extension cords is not recommended.
This refrigerator requires a standard 115/120-volt, 60Hz electrical outlet with three-prong
ground.
The cord should be secured behind the refrigerator and not left exposed or dangling to
prevent accidental injury.
Never unplug the refrigerator by pulling the power cord. Always grip the plug firmly and pull
straight out from the receptacle.
OPERATING YOUR REFRIGERATOR
Setting the Temperature Control
•
To control the internal temperature, adjust the control dial according to the ambient
temperature or purpose of use.
•
The first time you turn the unit on, set the temperature control to “5"
•
The range of the temperature control is from position" 1 " the warmest to "5" the coldest. After
24 to 48 hours, adjust the temperature control to the setting that best suites your needs. The
setting of “3” should be correct for home or office refrigerator use.
NOTE:
If the unit is unplugged, power lost, or turned off; you must wait 3 to 5 minutes before
restarting the unit. If you attempt to restart before this time delay, the refrigerator will not
start.