Ask Proxima DP9250 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
c
POWER REQUIREMENTS
Your projector uses nominal input voltages of 100-120 VAC or
200-240 VAC. The projector automaticaiiy selects the correct
mput voltage. !t is designed to work with single-phase power
systems having a grounded neutral conductor. To reduce the risk
of electrical shock, do not plug into any other type of power
system.
Consult your authorized dealer or service station if you are not
sure of the type of power supply being in use.
Connect the AC power supply cord (provided) to
the projector.
The socket-outlet must be near this equipment
and must be easily accessible.
Projector side (Female)
AC outlet side (Male)