Addendum – Arcam Delta 150 NICAM User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Addendum
The following points were omitted from the Delta 150 handbook:
The "MUTE" function on the CR50 remote control handset will only work when the "VARIABLE AUDIO OUTPUT" is
connected.
When switching the Delta 150 on from the "STANDBY" mode, the last selected channel number will
appear on the front panel display.
If the Delta 150 is switched on with the power switch on the front panel, It will default to channel 1.
When the Delta 150 is connected to your hi fi VCR using a SCART (or separate audio/video leads), it will be necessary
to switch the VCR to the "AUX" mode in order to record stereo transmissions.
Please refer to the VCR's handbook.