Maintenance, 1) cleaning or replacing the filter, ᕡ cleaning or replacing the filter – Canon LV-X6 User Manual
Page 60: Caution, Vacuum the filter through the filter cover, Catch
51
6. Maintenance
ME
NU
BA
CK
KEYSTONE
W
ARNING
PO
W
ER
AU
TO
PC
INP
UT
LA
M
P
-
+
VOL
VO
L
This section describes the simple maintenance procedures you should follow to clean the filter and replace the lamp.
ᕡ Cleaning or Replacing the Filter
The air-filter sponge keeps dust and dirt from getting inside the projector and should be cleaned after every 100 hours
of operation (more often in dusty conditions). If the filter is dirty or clogged, your projector may overheat.
CAUTION
•
Turn off the projector, turn off the main power switch and unplug the projector before replacing the filter.
•
Only clean the outside of the filter cover with a vacuum cleaner.
•
Do not attempt to operate the projector without the filter cover.
To clean the air-filter:
Vacuum the filter through the filter cover.
To replace the filter (sponge):
1. Remove the filter cover by pushing down on the catch of the cover until you feel it detach.
P
U
S
H
PU
S
H
Catch
2. Gently peel off the filter (sponge) and replace it with the new one.
To reset the filter usage time, from the menu, select [Reset]
→ [Filter counter].
See also page
for resetting the filter usage time.
LV-X6 (one filter)
LV-7250 (two filters)