To enable the password function, ᕥ preventing the unauthorized use of the projector – Canon LV-X6 User Manual
Page 42
33
4. Convenient Features
ᕥ Preventing the Unauthorized Use of the Projector
A password can be set for your projector to avoid operation by an unauthorized user using the Menu. When a pass-
word is set, turning on the projector will display the password input screen. Unless the correct password is entered, the
projector cannot project an image.
To enable the Password function:
1. Press the MENU button.
The menu will be displayed.
2. Use the SELECT
or
button to select [Setup] and press the OK or SELECT
button.
3. Use the SELECT
or
button to select [Installation].
4. Use the SELECT
or
button to select [Password] and press the OK or SELECT
button.
5. Use the SELECT
or
button to select [On] and press the OK button.
The [Password] screen will be displayed.
6. Type in a combination of the four SELECT buttons
and press the OK button.
To cancel this operation, press the MENU button.
NOTE: A password must be four to 10 digits in length. Please make a note of your password.