Harbor Freight Tools Model 94275 - Manual (Page 15)

SKU 94275 For technical questions, please call 1-800-444-3353. PAGE 15
Assemble the two Support Brackets (32) to the Dust Reclaimer Housing (22A) 4.
using parts 28, 29, 30, and 31. Do not tighten up the Nuts (31) completely at this
point. See Figure 10 below.
Place the Support Brackets (32) on a flat surface. Adjust the position of the 5.
support brackets and the Dust Reclaimer hose nozzle until it looks like it does
in Figure 10 below. Make sure the Support Brackets are parallel with the dust
collector hose nozzle. After ensuring the support brackets center line is in line
with that of the dust collector hose, firmly tighten up the Hex Nuts (31). See
Figure 10 Below.
Figure 10
22A
22
29
31
32
32
30
28