Audiovox DT 941 CI - Manual (Page 28)

Dialing From Memory
■ Press ( TALK 1 tû gel a line.
Press youVe pfofnpled to
enter a speed dial location
number
SPEED DIfiL
LOCfiTI0H__
Enter a 2 digit location number
i0l-20).
The number stored in that location
win be displayed end immedisiely
dlaJed.
Or
Beginning frem the OFP frode.
press CMEWQ lollowed by
a 2 digit
location number f0l„20).
Press (M em ] again to e?(it memory
dial mcKte and leave tne number
on the display.
Note that if digits were on the
display prier to entering memory
dIaJ mode, the contents ol the
speed dial memory will be
appended to those digits. For
example, if 1S03 was on the
display and the contents of the
memory location is S42E3S1. then
the display would show the
following upon exiting memory
dial mode:
Press iTAiK) , the number on the
display will be dialed after a 2
second pause.
NOTE: v ’ i
The ability to tempofarily 'atfd'memo^^
contents to digits aJrea^'entered on'
the display operates lrvli«^s^B-™y
for Caller ID (CIO) and spaed tfai
memones.
-i'v-
In this way, long distança an d area
codes (for example," 1503);'can be;
entered on the :dt$play'^ :and can-
prefaoe numbers recall^ frb^ Caller
10 (CIO) memory befdr^diajih^.' This
is important because only'th^ last 7
digits of any number are- displayed
when dialing Irom Caller ici (CiD)
memory. ' ■■■■-
Changing Stored Numiiers j
To change or replace a stored number
simply enter the new number on the
display and store it in the memory
location you wish to change.
2«
Ti
S( tviirsi. it wiPu