Casio CELVIANO AP-33V - Manual (Page 40)

A-6
Byte 1 Byte 2 Byte 3
BnH 78H 00H
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of this message immediately mutes all tones play-
ing over the MIDI channels.
Reset All Controller ★
Format
Byte 1 Byte 2 Byte 3
BnH 79H 00H
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
Recognition
Receipt of the Reset All Controller message causes the
following controllers to be reset.
Controller Name Reset Value
Modulation Wheel vvH = 00H
Expression Controller vvH = 7FH
Hold 1 vvH = 00H
Portamento vvH = 00H
Sostenuto vvH = 00H
Soft vvH = 00H
NRPN msb = 7FH, lsb = 7FH
RPN msb = 7FH, lsb = 7FH
Pitch Bend Change llH mmH = 00H 40H
Byte 1 Byte 2
CnH ppH
pp .... Program Number = 00H to 7FH
Send
Program Change messages are sent when you select a
tone on the instrument.
Byte 1 Byte 2 Byte 3
EnH llH mmH
n ....... Voice Channel Number = 0H to FH (Ch1 to Ch16)
ll ....... Pitch Bend Change LSB = 00H to 7FH
mm .. Pitch Bend Change MSB = 00H to 7FH
Recognition
• The value llH mmH is 00H 00H at the lowest pitch,
00H 40H at mid-pitch, and 7FH 7FH at the highest pitch.
• You have to set both the LSB and MSB together to form
a 14-bit value and make a Pitch Bend Change message
recognized by the instrument.
Channel Mode Message
All Sound Off ★
Format
427B-E-070B
Pitch Bend Sensitivity ★
RPN MSB = 00H
RPN LSB = 00H
Data Entry MSB = mmH
mm .. Pitch Bend Sensitivity = 00H to 18H (0 to 24 semi-
tones)
Recognition
The data entry LSB is always ignored.
Master Fine Tuning
RPN MSB = 00H
RPN LSB = 01H
Data Entry MSB = mmH
Data Entry LSB = llH
mm ll .... Master Fine Tuning = 00 00H to 40H 00H to 7FH
7FH (-100 to 0 to +99.99 cents)
Master Coarse Tuning
RPN MSB = 00H
RPN LSB = 02H
Data Entry MSB = mmH
mm .. Master Coarse Tuning = 28H to 40H to 58H (-24 to
0 to +24 semitones)
Recognition
The data entry LSB is always ignored.
RPN Null
RPN MSB = 7FH
RPN LSB = 7FH
Recognition
Once an RPN Null is sent, all received data entry MSBs
and LSBs are ignored until another RPN message other
than RPN Null or an NRPN message is received.
Program Change
Format
Pitch Bend Change ★
Format
AP31/33_E_MIDI Data.p65 03.10.7, 11:00 AM Page 6 Adobe PageMaker 6.5J/PPC