Dixon Marking Tools TECHNICAL DATA BROCHURE ZTR 4422 - Manual (Page 4)

THE FOLLOWING INSTRUCTIONS REFER TO 42" MOWER DECKS:
INSTALLATION:
1. Position mower deck assembly under frame, raise front of mower deck assembly enough to
allow cross shaft P/N 1332 to slide through frame guides and mower deck guides. Install (2)
washers P/N 3094 and (1) hair pin cotter P/N 3072 on each end of the cross shaft.
2. Attach short L -rod P/N 1355 to lift arm as shown in drawing.
3. Attach long L -rod P/N 1409 to rear lift arms as shown in drawing.
Page 4 of 13