Automatic presetting, Note, To scan the preset stations – Aiwa CDC-XI User Manual
Page 11: To tune in the preset stations
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m
3
w
3
"
Automatic Presetting
The automatic presetting function is used to automaticaliy preset up to 6 stations for each band.
1 Press BAND to seiect the desired band.
2 Press and hoid A.M down for more than 2 seconds until a beep tone is heard.
The
scanning
starts
from
the
currentiy
dispiayed
frequency
to
higher
frequencies
and
stops
when
6
stations have been preset or the receivable frequencies have been scanned once.
Note
•The presetting is not performed if there is no station to be tuned in.
•
When
the
automatic
presetting
is
performed,
the
previously
preset
stations
are
automatically
erased.
•To stop the automatic presetting, press A.M again or press any of the preset station buttons (1 - 6).
To scan the preset stations
Press A.M for less than 1 second.
Each preset station is tuned in for 5 seconds in order.
To stop the scanning, press A.M again or any of the preset station buttons (1
■
6
).
To tune in the preset stations
Press BAND to select the desired band and press the desired preset station button (1 - 6).
The number of the preset station button is displayed and the preset station is received.
11