Setting the clock manually, To set the colour system, 3 ok/enter – Aiwa HV-DH1EH User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Before Operation - VCR part
Setting the clock Manually
The clock in your VCR controls time and date
settings for your VCR.
The clock is set automatically during ACMS
(Automatic Channel Memory System) when your
VCR detects a channel that broadcasts a Teletext
signal. If the broadcast signal is weak the clock
will not be set and will require setting manually.
1
Press ©/
SETUP
.
Press or ►to select
TIME DATE
.
Press
OK/ENTER
.
The auto adjust mode can be set to “OFF” by pressing
A or T if you want to set the time manually.
Press
OK/ENTER
.
To set the colour system
1
Press ©/
SETUP
.
2
The main menu will appear on the TV screen.
A Press or ►to select the
SYSTEM
and press
3
OK/ENTER
.
4
Press A or T to select according to the
COLOUR
system used.
5
Press ©/
SETUP
to remove the menus from the TV
screen.
2
Use the
numbered buttons
on the remote control
to alter the
HOURS, MINUTES, DAY, MONTH
and
YEAR
.
Please note your VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when
you enter the year.
3
4
If you make a mistake press or ► and enter the
correct details.
Press ©/
SETUP
.
ny