Setting the temperature, Setting the timer – NewAir Portable Air Conditioner AC-10000E User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 * Press the MODE button to select the desired mode (cooling, fan, or automatic).
2.
The selected mode's indicator light will turn on.
Setting the Temperature
1.
Press the UP or DOWN button to change the set temperature.
2.
The display window will then indicate the set temperature. If no temperature is set,
the display will show the room’s ambient temperature.
3.
Please note that the preset temperature for cooling is 75° F.
Setting the Fan/Ventilation Speed
1.
Press the SPEED button to select the desired fan speed (high or low). The
appropriate indicator light (high or low) will turn on accordingly.
2,
If the unit i$ in AUTO mode, the fan speed will be automatically set
according
to the
ambient temperature (the appropriate indicator light will turn on). Please note that
when the unit is in AUTO mode, the speed setting cannot be changed.
Setting the Timer
1.
Press the TIMER button to set the desired number of operating hours (from 1 to 12
hours). When the set time has been reached, the machine will automatically turn off.
The display window will show the number of hours being set as you press the
TIMER button. If the TIMER is not set, the unit will work continuously.
2.
By pressing the TIMER button without selecting any other modes or settings, you
can set the number
oFhours
to be delayed before the unit
turns on.
For example,
if you press the TIMER to “2", the unit will automatically turn on after 2 hours.
Setting the Mode/Function
All of the above functions can also be performed
with the included remote control.
The remote control requires 2 AAA batteries to
operate.
FIG. 15 ^