Denon AVR-787 User Manual
Page 51
ENGLISH
48
ENGLISH
Advanced Setup – Part 1
Advanced Setup – Part 1
Press
F
F G
G
to set.
Setting the EXT. IN Subwoofer Level
Press
D
D H
H
to select “EXT IN SW Level”, then press
ENTER
.
Press
F
F G
G
to set.
Press
ENTER
.
1
2
3
Sets the playback level of the analog signal that was input to the EXT.
IN subwoofer terminal.
Setting the iPod Assignment
It is possible to assign the Control Dock for iPod’s (ASD-1R, sold
separately) audio and/or video signals to any input terminals on the
AVR-787 and play them.
1
Press
D
D H
H
to select “iPod Assign”, then press
ENTER
.
OFF:
This is the factory default setting.
CD, AUX, CDR/TAPE:
When using a Control Dock for iPod, it is possible to connect with
the audio input terminal of the assigned function.
DVD/VDP, TV/DBS, VCR, V. AUX:
When using a Control Dock for iPod, it is possible to connect with
the audio and video input terminals of the assigned function.
2
Press
ENTER
.
3
1
2
1
2
(When “CDR/TAPE” is selected)
h
h
Setting the Input Function Level
Press
D
D H
H
to select “Input Function Level”, then press
ENTER
.
• After completing this setting, check that the playback levels for the
different sources are the same.
1
Press
D
D H
H
to select the input source, then press
F
F G
G
to set.
The volume can be adjusted within the range –12 dB to +12 dB.
2
Press
ENTER
.
3
The playback level is corrected individually for the different input
sources.
1
2