Installation/connections – AEG MICROMAT DUO 220 User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

If you think your microwave oven is not

functioning properly

Before calling the service centre, please check whether, on the

basis of the following hints, you can rectify the fault yourself.
If your microwave oven no longer works, check whether:

■ your appliance is plugged into the mains supply;

■ the fuses in the fixed wiring are in order;

■ the door is fully closed;
■ the start button is pressed.

If after you have made this check the microwave oven still does not

work, please call the AEG service centre or your retailer.

If after you have made these checks the microwave oven still does

not work, please telephone AEG Customer Sen/ice.

■ If you decide to call the Service Centre to help with any of the

above instructions or on grounds of faulty operation, the service

engineer's visit cannot be made free of charge even during the
guarantee period.

■ Therefore please take careful note of our instructions on the

operation of your microwave oven.

■ AEG electrical appliances comply with all the valid safety re­

quirements, Repairs to electrical appliances should only be per­

formed by a trained electrician. Improper repairs may place the

user at serious risk.

installation/connections

A gap all around the oven of 5 cm is necessary in order to assure

perfect ventilation.

Connect to a plug socket with protective earth contact and

fused with a 16 A-L automatic device or 16 A slow-blowing
fuse!

.50 mm

50 mm

MC 249

25

Advertising
This manual is related to the following products: