Cleaning and care – AEG COMPETENCE 2040 B User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Allow the oven to cool down and switch off before cleaning.
Cleaning and care
Ovens which are cleaned after every use need very little attention,
if left and used again, fat splashes will bake on and a^e then diffi
cult to remove.
Clean
glass surfaces, trims and controls
with a soft cloth and
lukewarm water. Polish dry with a soft doth.
Vitreous enamel
interior surfaces can be cleaned with:
- a damp cloth and mild detergent
- cream cleaners such as “Jif and a soft cloth
- oven cleaners such as “Ovenpad” or "Kleenoff.
Do carefully follow the manufacturer’s instructions on the
cleaning materials you use.
Take care that oven cleaners do not come into contact wifri the
element or any other part of the oven other than the vitreous
enamel.
Do not use scouring pads or abrasive powder which may
scratch the surface of any part of the appliance.
The oven can be illuminated for cleaning. To do this, turn the con
trol knob to the lamp position.
For thorough cleaning various parts can be removed:
WARNING! Isolate die oven from supply before replacing
oven lamp.
To clean the glass cover or change the oven lamp, the glass
cover can be taken off by turning it anti-clockwise.
Before
cleaning
the oven
Cleaning
Oven
lighting
Cleaning the
lamp cover or
replacing the
oven lamp
13