NewAir Air Cooler AF-320 - Manual (Page 3)

TIMER
This air Ioniser and cooler Is equipped with an eight-hour timer.
This enables you to preset the machine to switch ott automatically at
a chosen number of hours ahead (1,2. 4 or 8 hours). To operate
simply select the number of hours aheod at which you wish the
machine to switch off. If you wish the machine to run continuously,
ensure the timer control is in the "OFF* position.
SPEED
This button switches the unit on and also controls the speed. The air
ioniser and coder has three air speeds. You can regulate the aHlow
output speed by simply selecting the speed flow (LOW. MEDIUM or
HIGH) to suit your requirements.
SWING
This control gives you the choice of having either a fixed or continuously
svA^eping air tiow. For a continuous sweeping air flow switch the
oscillation control to the "ON" position. If you require the air flow to be
delivered In a fixed direction, switch the oscillator control "OFF* when
the oscillator louvrers ore In the required direction.COOL
COOL
This function helps to remove latent heat from the atmosphere.lON
ION
This control allow? you to Introduce negtlve ions to the air.
REMOTE CONTROL
Effective range: up to 6 meters.
Do not forget to Insert batteries In the remote control.
PREPA RATION A ND ON/OF F FUNCTION
1. RerTKDve the unit from its packaging.
2. If the humidify function is required, lift up the top cover of the
machine and fill where indicated. Do not put water into the
compartment marked 'ICE ONLY'. Only fill with cold clean water
Indicated "WATER ONLY'.
Fill according to level Indicator on the front of the machine.
DO NOT OVE RFILL
1. Always use clean tap vsater and do not allow the same water to stay
in the machine for extended periods ot time. It Is recommended that
any water left In the machine for 3 or more days should be drained
away via the drain plug on the base of the unit.
2. Switch on at the mains and press the "SPEED/ON' control which starts
the appliance.
If the unit is required to be on continuously, this is automatic and the timer
control does not need to be used. The timer control is only used to
pre-set specific operating times required.
3. Operate the "COOLER" and "OSCILLATION' functions as required.
4. To switch off at any time, press the "OFF* button.
IMPORTAN T
1. In coc^r furx:tlon. for a maximum efficiency, ensure the room Is well
ventilated.
2. Do not overfill with water (check water level at front).
3. Only fill halfway with water if uslr»g Ice In conjunction with water.
4. Make sure drain p^ug is tight before filling. When draining out water
please ensure the drain plug Is refitted correctly aixJ tightly.
5. Only use cold cleon water
6. Only fill with water via the water compartment where indicated and
Ice In the Ice compartment where Indicated.
7. If the mains lead becomes damaged, pleose contact your supplier.