AEG 1263 User Manual
Öko-u\vamat 1263 turbo
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- Allow me to introduce myself
- Customer service
- Warnings
- - Repairs must only be carried out by qualified persons. Inexperienced repairs can seriously endanger the user.
- ... the fabric softener has left marks on the laundry:
- ... detergent residue is left after the wash cycle:
- ... foam remains after the last rinse:
- ... no water is visible in the drum:
- ... the laundry is not sufficiently spun and there is still water in the drum:
- ... the machine does not dry:
- ... the machine does not empty or does not spin:
- ... too much foam forms during washing:
- ... water is leaking from the bottom of the machine:
- ... washing results are poor:
- ... there are grey marks on the laundry:
- How to deal with problems...
- The AEG OKO-System / Ecological hints
- Maintenance and cleaning
- Installation instructions
- Drying time chart
- Connection
- Panelling the door
- Prepare the laundry
- Select the programme
- Select the temperature and drying time (if required)
- Open the porthole door
- Load the laundry into the machine
- Close the porthole door
- Measure out the detergent
- Press the ON/OFF button
- At the end of the programme
- Release the ON/OFF button
- Remove as much water as possible from the laundry!
- Use optimum loads!
- Weight
- Load
- Warning:
- Special programmes
- Programme chart (Washing)
- Detergents