Autostart AS-1414 - Manual

Explorer
To obtain a copy of the complete installation guide,
please visit the http://www.autostart.ca website and
click on the « Download » tab.
http://www.autostart.ca/ Installation Guide
A U T O M A T I C T R A N S M I S S I O N R E M O T E S T A R T E R
AS-1414/AS-1424
Quick Installation Guide
To obtain a copy of the complete installation guide,
please visit the http://www.autostart.ca website and
click on the « Download » tab.
Tsbie of Contents
How to Flash the Hood Pin................. 1
Resetting the Module (without the plug­
in valet).......................................... 2
Transmitter Programming Procedure. ..2
Entering Programming Options............ 2
Programming Options........................ 2
Multi-speed Tach Programming............ 3
Horn HonkTiming.............................. 3
How to Flash the Hood Pin
Tachjumpersettings........................... 3
Supplementary Information..................6
Fifth Relay Output (2nd IGN, ACC or
CRANK)..........................................6
Testing........................................... 6
Diagnostics - Parking Light Flash
Table..............................................7
THEINSTALLER^ THEMODULE^
1. Press and hold the hood pin for 4 seconds.
2. Release the hood pin.
3. While the parking lights are on, press down the hood pin once more
and release the hood pin immediately.
4. You now have 20 seconds to select one of the sub-menus
Parking Lights “ON”
“ON” for 20 seconds
Notice
The manufacturer will accept no responsibility for any electrical damage resulting from improper installation of the product, be
that either damage to the vehicle itself or to the unit. This unit must be installed by a certified technician using all safety devices
supplied. Please note that this guide has been written for properly trained Autostart technicians: a certain level of skills and
knowledge is therefore assumed. Please reviewthe installation guide carefully before beginning any work.
Warning
This remote starter is designed for vehicles with an automatic transmission only. Before installing the unit, test that the
vehicle does not start when the gear select lever is in the “Drive” position. If it starts in gear, install a manual-transmission
remote starter system instead.
DOC.4.01 ■ March 8, 2006 GASP Manufactured in Canada