Changing the tv's input – Daewoo DTQ 27U8SC User Manual
Page 17

Changing the TV's Input
Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve
connected another component to your TV(such as a VCR or DVD) using the Video/Audio/Y Cb Cr
input, you will want to be able to view the signal from the component.
To do this, you will need to switch from the ‘ TV ’ input to the ‘ AV1, AV2, CVI’ Input, as follows.
1
With the TV on, press the MENU button twice, then “ Set-Up ” menu will appear.
2
Use the WCHV buttons to select “ Input ”.
3
Press the CVOLB buttons to change from ‘ TV ’ to ‘ AV1, AV2, CVI’.
4
Wait 10 seconds, or press the MENU button to return to normal TV viewing.
12
Chapter 3: Operating Your TV
Select
Set-Up
Language : English
Input :
AV1
Adjust
Next
3-1
Select
Set-Up
Language : English
Reception : Air
Memorize Channels
Add/Delete Channels
Input :
TV
Adjust
Next
2
Select
Set-Up
Language : English
Input :
AV2
Adjust
Next
3-2
Select
Set-Up
Language : English
Input :
CVI
Adjust
Next
3-3