Adcom GCD-700 - Manual (Page 6)

f^RONT PANEL CONTROLS
Please refer to the diagram of the front panel and the diagram of the Remote Control Transmitter RC-700CD on page 7 to
identify the controls and their functions.
® ® d) ® ® Gl (E)
FRONT PANEL DIAGRAM
POWER ®
Turns the GCD-700 on and off. When initially powered up the display will show the last volume setting, for further information
see the Remote Control Volume
+1- section. The player will normally power up and begin playing the first track of the first disc
unless the player was turned off while playing another disc, in which case it will begin playing the first track of that disc.
DISC TRAY 0
Capable of holding five discs at one time, it will accept both five and three inch discs without an adapter. Use the open dose
switch to operate the drawer. DO NOT ATTEMPT TO MANUALLY FORCE THE DRAWER CLOSED OR ROTATE THE TRAY
BY HAND AS DAMAGE MAY RESULT. Place each disc with the label side up in the numbered tray well, one disc per well.
Also, do not attempt to load a disc in the rear-most portion of the drawer as shown below as the player and/or disc may be
damaged. To load a disc in this position, rotate the drawer using the disc skip control which may be operated when the drawer
is open provided a disc is not playing.
CAUTION
DO NOT ATTEMPT TO INSERT A DISC WHERE INDICATED BY THE ARROW AS DAMAGE TO THE INTERNAL
MECHANISM AND/OR DISC MAY RESULT.