R\ a – Aiphone BX-1200 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Balanced Low impedance Microphone:
Use with two conductor shielded cable.
Canon XLR-M
Balanced Microphone
Unbalanced Low Impedance Microphone;
Use with single conductor shielded cable.
Unbalanced Microphone
Canon XLR*M
Phonograph:
A magnetic phonograph cartridge may be connected to PHONO input.
A ceramic or crystal cartridge pick-up may be connected to AUX, AUX-1 or AUX-2 input. Use a single
conductor or two conductor shielded cable, and ground the separate ground wire from the player to
GROUND terminal on the back panel.
@
PHONO
Connect to the GND
(■&)
terminal of the amplifier
*There are two PHONO jacks (R and L) provided for the connection with stereo player. The R and L
channels will be mixed automatically.
Auxiliary (AUX, AUX-1 & AUX-2):
An AM/FM tuner, tape player, remote microphone, chime, mixer preamplifier or other high level signal
sources may be connected to the AUX, AUX-1 or AUX-2 input.
Use single or two conductor shielded cable.
From unbalanced type
AUX, AUX-1, -2
output equipment
From balanced type
output equipment
L or R
AUX, AUX-1, -2
Lor R
£3-
From Stereo Type
Output equipment
AUX, AUX1, AUX2
V_
r\------------- A
.
MIIMII Iiiiuiudiu 1
j II j.................... . I^L U---------------------------------------^