American Dryer Corp. AD-100 - Manual (Page 53)

dia 4holM
If more headroom is needed after
removal of the skid.
1. ) Disconnect the ground
wire (a) at the rear
of the dryer, (see
figure 4)
2. ) Remove the nuts (b)
holding the console
to the base, (see
figure 3)
3. ) Release control door.
4. ) Disconnect plug (c)
located in the con­
trol box. (see figure
3 )
5. ) Lift the console from
the base, (see figure
4)
To level the dryer.
1 .) Place 4" square metal
shims (e) (see figure
4), or other suitable
material under the
base pads.
10-5