Arcam A/V Processor XETA 2 User Manual
Arcam, Handbook, Xeta 2 a/v processor
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Table of contents
Document Outline
- ARCAM
- HANDBOOK
- USING YOUR XETA 2
- SYSTEM CONFIGURATION
- 1. BASIC CONFIGURATION WITHOUT COMPOSITE VIDEO (see figure 1)
- 2. USING THE XETA 2 AS AN INPUT EXTENDER FOR AN SOURCES (see figure 2)
- 3. TAPE LOOP CONNECTION (see figure 3)
- INSTALLATION
- MAINS SUPPLY CONNECTIONS
- MAINS SAFETY
- LOCATING YOUR LOUDSPEAKERS
- LOUDSPEAKER CONNECTIONS (See figure 4)
- CONNECTING YOUR SOURCE COMPONENTS
- COMPOSITE VIDEO CONNECTIONS (See figure 5)
- LINE LEVEL AUDIO CONNECTIONS
- FRONT PANEL FUNCTIONS FRONT PANEL CONTROLS
- FRONT PANEL DISPLAYS
- SWITCHING ON AND SET UP
- SET UP MODE : SYSTEM BALANCING
- SET UP MODE - Page 1
- SET UP MODE - Page 2
- BASIC SET UP MODE
- ALTERNATIVE METHOD
- REMOTE CONTROL COMMANDS
- UP MODE.
- Xeta 2 • Technical Specification