Tb-se sub operation, Technical precautions, 7 technical precautions – Aiphone TB-10M User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

TB-M places a buzzer-activating cali to a TB-SE sub

Buzzer sounds continuously at TB-SE sub, in

addition to ordinary tremolo. Pick up on the
TB-SE station, that the buzzer is connected to.

Adjusting receive and caii tone voiume

- Receive

Call tone

3-levels each

Upper control adjusts handset receiver volume,

when TB-M does not hear a TB-SE sub clearly.
Tone control adjusts ringing tremolo, 3 levels.

TB-M dual-master system

TB-M 1

i?l

luj lU^ If

TB-M 2

i \

\

I j ■ ■'

,

^ I

III Ilf p . if" IT Kl‘ ti‘

Common TB-SE(s) i

Two masters call and communicate with each assigned select
button. Transfer of a sub’s call to another on the other master is not

possible.

A call from TB-SE subs that are connected to two masters activates
tremolo tone at both masters. When the controlling TB-M is busy,
the other TB-M may pick up. In this case, the sub hears both
tremolo and busy tones.

★ Dual-master has an operation that, when TB-M1 places a call to

either TB-M2 or a common TB-SE that is already In
communication, the talk line is connected among 3 parties.

It reduces communication volume. One party should hang up to
restore normal volume.

TB-SE sub operation

- Speaker

for call tone

To call TB-M master, simply pick up and it rings TB-M with tremolo
tone, which continues ringing until the call is answered. Intermittent
tone means the master is occupied. Hang up or continue to hold.
When called by tremolo tone, simply pick up.

TECHNICAL PRECAUTIONS

★ The power switch is located on back panel of TB-M console, which should be placed ON, except for

special occasions. If the system malfunctions, turn off and on TB-M master, by which the system
may reset itself. Possible causes are; power supply is unplugged, connecting wires are loosened or
shorted. Do not attempt to open TB-M equipment nor change wiring. Ask qualified personnel.

★ At end of each communication, be sure to place handset in cradle properly. If not, TB-M master or

TB-SE sub will not hear the call tone.

★ The TB-M is rated to operate at temperatures between 0°C ~

h

-40°C (32°F ~ 104°F).

★ Clean the TB-M equipment with a soft cloth dampened with neutral household cleanser. Never use

any abrasive cleaner or cloth.

- 1 1 -

Advertising
This manual is related to the following products: