Specifications – Dixon SPEEDZTR 30 User Manual

Page 17

Advertising
background image

SPECIFICATIONS

17

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

Additional information may be provided elsewhere in this manual.

SpeedZTR™ 30

Chassis:

11 gauge welded channel frame

Body:

Body parts are made of rotational molded polyethylene.

Mower Deck:

11 gauge stamped steel construction. Single 30” cut

blade. Cut height approximately 1-1/2” - 4” via 7-
position lift handle.

Blade Drive:

Mechanical; hand lever engagement.

Transmission:

Each rear wheel is independently driven by a Hydro

Gear EZT self contained hydrostatic drive.

Engine:

13 HP Briggs & Stratton Intek, 4-cycle, single cylinder,
air-cooled, gasoline, vertical shaft, aluminum head and
block, cast iron sleeve, AVS balanced.

Starting

Electric-key switch operation with safety interlock

System:

on parking brake, steering levers and blade drive.

Tires:

Front 11 x 4.00-5 smooth tread (16-21 PSI)
Rear 18 x 6.50-8 turf tread (8-14 PSI)

Capacities:

Fuel

.75 gallon

Engine Oil

1.25 quarts

Dimensions:

Width

33.5” outside rear wheel measurement

Width

38” overall width of deck with deflector

Height

40.25” to top edge of seat

Length

67” hitch tab to front

Weight

393 lbs.

Advertising