Changing the nticro-filter/ultra-micro-filter, Motor protection filter, Cleaning – AEG VAMPYR 825I User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
о
Changing the nticro-filter/ultra-micro-filter
Switch off and pull out the mains plug before changing the micro-filter.
Changing the micro-filter/ultra-micro-filter is-necessary:
For appliances with no micro-filter indicator
- when the dustbag full Indicator
lights up, even when aclean dustbag has been inserted, with the appliance switched
on, hold the head/nozzle upwards or off the floor, ifthe light remains on, thisindicates
the micro-filter should be changed. We recommend changing the micro-filter with
every fifth bag.
For appliances with micro-filter indicator
- when this comes on.
The cassette can be opened by pressing the micro
filter button. Take out the cassette in the direction of
the arrow and empty the micro-filter over a dustbin
- this avoids you touching the dirty micro-filter.
Insert the new micro-filter into the cassette as
shown in the illustration, push it back in parallel to
the floor, and snap the cover shut.
Motor protection filter
The motor protection filter is a permanent filter and does not have to be changed
regularly. Exception: if it has been damaged. See ‘What to do if...”.
0
Cleaning
The cleaner housing and dustbag compartment can be cleaned with a damp cloth
and then wiped dry with a soft cloth. Do not use any abrasives or solvents. The under
side of the cleaner head can be cleaned with the crevice nozzle from time to time.
25