Arcam Alpha 5 - Manual (Page 4)

INSTALLATION MAINS SUPPLY CONNECTIC
® Check that your mains supply voltage
agrees with the voltage setting on the
rear panel of the unit.
■ If your mains supply voltage is
different, consult your Arcam dealer.
MAINS SAFETY
■ This product is normally supplied
with a moulded mains plug already
fitted to the lead. If for any reason the
plug needs to be removed, it must be
disposed of immediately and
securely, as it is a potential shock
hazard when inserted into a mains
socket.
■ If the plug is removed then the
remaining lead must be rewired as
follows:
■ The blue •svire must be connected to
the terminal which is coloured blue
or marked with the letter N.
■ The brown wire must be connected
to the terminal which is coloured
brown or marked with the letter L.
■ The green and yellow wire must be
connected to the terminal which is
coloured green and yellow, or
marked with the letter E or the safety
earth symbol.
■ When replacing the fuse in the
supplied moulded mains plug, the
integral fuse holder/cover must always
be refitted.
■ Warning, this apparatus must be
earthed.
(D Insert the lEC line socket of
lead fully into the power in
rear panel. Connect the otl
your mains supply.
AUDIO CONNECTIONS
(D,®
AUDIO OUTPUTS - Bo
are identical. Connect one
your amplifier's TUNER ii
a suitable interconnect ca
other can be connected
VCR's audio input for
simultaneous broadcasts (sin
to a cassette deck for direct:
Insert the red phono plug
sockets labelled 'R' and
phono plugs into the socke
'L'.
AERIAL CONNECTIONS
© AERIAL SOCKET - Cor
aerial downlead using the
adaptor if necessary.
OPERATION
MONO - Selects mono
output. The led (light emití
will glow red when mono i
If a weak station is receive«
the background hiss can b
(and in most cases eUmi
selecting mono.
AUTO - Selects automatic
tuning. The led will gl«
when AUTO is selected. 1
not Ut manual tuning is sel<