Audiovox CDM 4500 - Manual (Page 25)

Voice Mail Notification with Mail Retrieval Service (MRS)
1. The phone sounds a short ^
beep tone. Messa9e
Retrieval
2. Press to answer the incoming caii, your
phone wili be connected to your Voice iVlessage
Service so that you may retrieve your messages.
3. If you choose not to answer the incoming caii,
“Message Retrieval” wili be stored in the stack
for retrievai of your messages at a iater time.
To Display the Number of Voice Mail Messages
Example:
1. Press . A mark “ »r ” is
fiashing, when a new mes­
sage is avaiiable.
2. Press to seiect
"VOICE”.
The number of messages
in your Voice Maii wiii be dispiayed.
3. if a Text Message is attached to the Voice Maii
Notification, the Text Message can be reviewed
by C ^Otherwise this step is skipped.
4. PressQ^.Scroilto'‘QUIT’
or “ERASE” the notification
you reviewed.
5. Press .
____ MESSPGE
^ TEXT ,
10/30 USED!
x<Voice Mai1x<
12 Vaitins
VIEWh
MENU
►
ERPSE
I NO
6. To erase the Voice Mail
Notification, scroil to “YES”,
othenwise “NO”, and press
Voice Mail Dialing
You can store one set of iinked numbers in a speciaiiy
provided memory, and access these numbers with one
touch of the “Voice Maii Access” key .
To Store the Voice Mail Access Number
Piease see To Store Linked Numbers in Phonebook
on page 38, and follow the steps 1 - 3 to make a set of
linked numbers. Press to store.
Up to 80 digits of linked numbers can be stored includ­
ing link mark “ = ”. You can also add a Name Tag (up to
20 to 24 characters) with your voice mail number. (See
To Store a Name with Phone Number on page 27.)
To Call Your Voice Mail
1. Press and hold (vT). The first number will be dis­
played and dialed.
2. Press (v£) .The second number will be displayed
and sent in Touch Tone™ signal.
3. The succeeding numbers can be sent sequentially
by pressing ( v T ) .
To Review the Voice Mail Access Number
1. Press to select the Phonebook Address
Mode.
2. Press (v+) .The first linked number in (VT) will be
displayed.
3. Press (one or more times) to display the re­
maining linked numbers in (VT).
Text Messages (Short Message Service)
Your phone is able to receive and display Text Mes­
sages of up to 255 characters long. The Text Message
memory stack can store up to 30 messages. When an
SMS message is received, the following occurs.
1. A short beep tone sounds.
2. The ^ indicator at the upper right of the display
flashes to alert you.
The display indicates “NEW
MESSAGE” with animation.
3. The Text Message just re­
ceived is stored in the Memory Stack. To review
stored messages, see To Review a Text Message
on page 50.
4. If the Memory Stack is full, any new Text Messages
will not be stored, and you
will have the display:
I
Tiiil
NEW MESSAGE
op
MEMORY FULL!
Mew Te»t
Rejected
ys 49J