Installing your remote control batteries – Daewoo ET 13P2 User Manual
Page 9
6
Chapter 1 : Overview of Your Equipment
Installing your remote control batteries
1
Open the battery compartment on the back of the remote control.
2
Install two AAA-size batteries (not included) as shown. Make sure the “+” and “-”
terminals are oriented correctly.
3
Replace the cover.
Notes
Do not mix different types of batteries, or mix an old and a new battery.
Remove and replace weak batteries. Weak batteries can leak and damage your con-
troller. Dispose of batteries properly; never throw them into a fire.
Point your remote at the receiver on the center of the front of the TV. Make sure the
receiver is not blocked.
The remote control can operate up to 30 feet away from the TV, if you are directly
facing the front of the TV. Operating distance diminishes as you move to the sides of
the TV.